E3 ENGINE Motion Controller for Dobot MG400 / Robot arm control with a DualSense controller

Move the arm,
from your hands.

E3 ENGINE Motion Controller for Dobot MG400 is a Windows application for operating the Dobot MG400 desktop robot arm with a PS5 DualSense wireless controller. It is intended for jogging and for pick-and-place demonstrations, and it is built with safety first.

Free of charge / no licence file / latest version 1.3.0 (2026-11-06) / Windows 10 and 11 (64-bit)

DualSense ワイヤレスコントローラーを両手で持ち、左右の親指をそれぞれスティックに置いているところを、操作者の肩越しに撮った写真。奥にピントの外れた卓上ロボットアーム Dobot MG400 があり、アームの先のグリッパーが下を向いている。

From the operator’s side. The operator stands behind the robot, and the stick directions match this view.

See it move

From jogging
to pick and place.

Jogging with the sticks, switching speed and 1 mm steps, pick and place through recorded points, the emergency stop and automatic stops, and a tour of the screen. Three minutes of the real robot moving.

The Dobot MG400 desktop robot arm lifting a white rod in its gripper, with office cabinets behind it. 3:03

TOMOMI RESEARCH / YouTube Watch on YouTube ↗

Filmed by us in our own office, operating the real robot. The narration and captions are in Japanese. Nothing is sent to YouTube until you press play (the player then switches to youtube-nocookie.com).

Key features

Move it, record it,
send it home, grip.

Move the arm with the sticks, record where to pick and where to place, and send the arm through the recorded points in order. The operations a pick-and-place demonstration needs are on one controller. Without a controller, every operation can also be run from the buttons on the screen.

Dobot MG400 のグリッパーが、台の上に立てた白い棒を上からつかんだところ。奥に事務所のキャビネットが見える。

Grip. Descend to the recorded point and close the gripper with ×.

Dobot MG400 が白い棒をつかんだまま持ち上げ、手前に立っているもう 1 本の棒の上へ運んでいるところ。

Carry and place. ○ moves to the next point, always by a safe height.

01 / Jogging

One axis at a time, from the sticks.

The left stick moves X and Y; the right stick moves Z (height) and R (rotation of the end). Only the axis pushed furthest moves. R1 switches between four speed levels (slow 10%, medium 30%, fast 60%, max 100%), and the controller vibrates once for each level. The D-pad moves X and Y in 1 mm steps.

02 / Recording and replaying positions

Through the recorded points, by a safe height.

□ records the current position (up to 10 points), and each press of ○ moves to the next recorded point in order. Every move runs in three stages: rise to a safe height, move across to directly above the target, then descend to the target height. If the path would leave the workspace, the arm does not move. Recorded points are kept for the next start-up.

03 / Home and gripper

Return home, grip, release.

△ moves to the home position and × opens or closes the gripper. The gripper is connected to the robot’s digital output DO_01. The gripper button on the screen shows whether it is open or closed.

04 / Status and guidance

What state it is in, and what to do next.

The band at the top of the screen shows the connection, enable and jog state and the content of any alarm, and tells you the next thing to do. On the DualSense map, the button you press lights up. Coordinates, joint angles, speed, gripper and the number of recorded points are listed under Robot Status.

DualSense コントローラーの操作図。L1 は Jog ON/OFF、R1 は速度切替、Create は点を全消去、Options はエラー解除・有効化、十字キーは X/Y を 1 mm 移動、△ はホームへ戻る、○ は次の点へ移動、× はグリッパー開閉、□ は現在位置を記録。左スティックは上下で X・左右で Y、右スティックは上下で Z・左右で R。タッチパッドと PS ボタンは赤い枠で非常停止と示されている。押したボタン(左スティックと ×)が青く光っている。

The controller map (part of the application screen, labels in Japanese). The button you press lights up. Red is emergency stop (always active), blue works only while jog is on, black works at any time.

The operator stands behind the robot.

Stick directions match the view of an operator standing behind the robot and facing the same way. Pushing the left stick up moves the arm away from the robot (+X).

A jog continues until you release the stick, and stops when you do. When you change axis or reverse direction, the application waits for the robot to stop before starting the next motion.

Safety

Not a safety device.
So how it stops came first.

This software is not a safety device. Keep the robot’s hardware emergency stop within reach at all times. On top of that, the software gives you ways to stop the robot, and conditions under which it stops on its own.

Emergency stop

Stop at any time.

The PS button or touchpad on the controller, or the EMERGENCY STOP button on the screen. Always active whatever the jog state. It cancels the motion and any planned moves, and disables the robot.

Automatic jog off

Stops on its own when something is wrong.

If no status arrives from the robot for 0.5 seconds or more, if the controller disconnects, if the robot can no longer be operated, or if a command fails, jog is switched off and the robot is stopped at once.

Workspace limits

Stops short of the edge.

The workspace is checked on the PC. Jogging stops short of the edge, with a larger margin at higher speeds. At the edge the controller vibrates to tell you. Moves that would leave the workspace are not run.

Read this before you use it

This software is not a safety device. Keep the robot’s hardware emergency stop within reach at all times.

The arm can swing almost directly behind the base (the base angle reaches ±155°). Make sure that no people or objects are within the robot’s range during operation.

While connecting (Connect) and enabling (Enable, from a few seconds up to 15 seconds), the on-screen emergency stop responds late, because the application is waiting for the robot to answer. If you need to stop during this time, use the robot’s hardware emergency stop.

The lower workspace limit (Z −91.4 mm) was set for our own installation. If your table height differs, move slowly and check for interference.

Without a controller

No controller?
It still moves.

The DualSense is optional. Connecting, enabling, switching jog, speed levels, home, the gripper, and recording and moving to points can all be run from the buttons on the Control tab at the right of the screen.

The controller works over Bluetooth or a USB cable, and is recognised again automatically if it is unplugged and reconnected while the application is running. The Bluetooth settings can be opened from a button on the Control tab.

E3 ENGINE Motion Controller for Dobot MG400 のメイン画面。左上に緑の帯で「JOGGING X+ スティックを戻すと停止します」と状態が出ている。その下に、接続・ロボットのモード・速度・グリッパーと現在の座標を並べた Robot Status、ボタンの役割を書き込んだ DualSense の操作図、上から見た作業範囲の図(記録した点 1〜4 とホーム位置)、ログが並ぶ。右側の Control タブには、赤い EMERGENCY STOP ボタン、接続・有効化・速度段階・ホーム・グリッパーのボタン、記録した点の一覧表がある。

The main window in version 1.3.0, while jogging. The Control tab is on the right. Labels on the screen are in English; some guidance text is in Japanese.

Where it fits

It makes no judgement.
It moves the arm.

E3 ENGINE Motion Controller for Dobot MG400 is software in the E3 ENGINE family, alongside our anomaly detection engine. It makes no AI judgement. Its job is to move a desktop robot arm from your hands, and to show pick and place.

Specifications

A Windows PC,
wired to the robot.

Install it from the installer and connect it to the robot controller over wired Ethernet. The software communicates only with the robot on the LAN, and to check for new versions.

Product typeRobot arm control software (Windows desktop application), E3 ENGINE family
PriceFree of charge
LicenceNo licence file. You accept the Software License Agreement during installation
Latest version1.3.0 (2026-11-06)
Operating systemWindows 10 / Windows 11 (64-bit)
Free disk space300 MB or more
Display1920 × 1080 or larger recommended
RobotDobot MG400 (tested with controller firmware 1.6.0.0)
ConnectionWired Ethernet to the robot controller
Game controllerPS5 DualSense wireless controller (optional; Bluetooth or USB cable)
GripperConnected to the robot’s digital output DO_01 (ON closes it)
JoggingX / Y / Z / R, one axis at a time. Four speed levels (slow 10% / medium 30% / fast 60% / max 100%, as the robot’s speed ratio)
Recorded positionsUp to 10 points. Moves through them in order by a safe height. Saved to a file and kept for the next start-up
Safety functionsEmergency stop (PS button and touchpad on the controller, button on the screen) / automatic jog off on faults / workspace limits
NetworkOnly communication with the robot on the LAN, and checking for new versions (can be turned off on the Configure tab)
InstallationInstaller (about 44 MB; administrator rights required). MG400_DualSense_Controller_Setup_v1.3.0.exe
Files we sendInstaller / READ_ME_FIRST.txt / SHA256SUMS.txt (for verifying the download) / user manual manual_ja.pdf (17 pages) / quick reference cheatsheet_ja.pdf (one A4 page)
Language of the manualsJapanese. READ_ME_FIRST.txt is in English and Japanese

* This software is not a safety device, and it makes no AI judgement.

* The installer is not code-signed. The first time it runs, Windows SmartScreen may show “Windows protected your PC”. Select “More info” and then “Run anyway”.

* DualSense and PlayStation are trademarks or registered trademarks of Sony Interactive Entertainment Inc. Dobot and MG400 are trademarks or registered trademarks of Shenzhen Yuejiang Technology Co., Ltd. This software is not affiliated with these companies.

What’s new in 1.3.0

What changed
in version 1.3.0.

Released on 2026-11-06. If you use 1.2.0 or earlier, running the installer updates it in place.

Speed levelsNew speed level max (100%). It applies to stick jogging only; moves to home and to recorded points run at the fast (60%) speed
WorkspaceNow follows the shape in the DOBOT MG400 Hardware Guide: the radius depends on the height (188–440 mm), the base angle is ±155°, and the upper height limit is 187 mm. A margin is kept from the joint limits
Control tabButtons reorganised. Home and Gripper are larger, and Gripper shows whether it is open or closed. The Points buttons are split into recording and moving, and editing the list
Update noticeThe application now tells you when a new version is available (can be turned off on the Configure tab)
Emergency stopThe emergency stop on the Space / Esc keys was removed. Use the PS button or touchpad on the controller, or the EMERGENCY STOP button on the screen

How to get it

From request
to first move.

The software is free of charge. After you request it, we send a download link by email. There is no licence file.

Step 01

Request it

Through our contact page. Under “What this is about”, choose “E3 ENGINE Motion Controller for Dobot MG400 (free software)”.

Step 02

Receive the email

We send a download link for the installer, the manuals and the other files within two business days of your request.

Step 03

Install it

Run MG400_DualSense_Controller_Setup_v1.3.0.exe and accept the licence agreement. Administrator rights are required. The installer is not code-signed, so if Windows SmartScreen shows “Windows protected your PC”, select “More info” and then “Run anyway”.

Step 04

Set up the robot and connect

Before connecting, set the robot in DobotStudio Pro to “TCP/IP Secondary development”, and disconnect DobotStudio Pro from the robot. The robot can be operated by only one application at a time.

* The download link is sent only by email (it is not published on this page).

* If your company network blocks Google Drive, contact us at info@tomomi-research.com.

* The application tells you when a new version is available.

Get started

Start by moving
your own MG400.

The software is free of charge. We send a download link by email within two business days of your request. For questions about setting it up or using it, please contact us.

Tel +81-466-54-9003 / info@tomomi-research.com