See a Robot Find Dents and Scratches Live at RoboNext 2026, Booth A-48

RoboNext 2026 official key visual: December 2–4, 2026, INTEX Osaka

Image: RoboNext 2026 official key visual (organized by the Japan Robot Association and Nikkan Kogyo Shimbun, Ltd.)

TOMOMI RESEARCH, INC. will exhibit at RoboNext 2026, a robotics and mechatronics trade show held at INTEX Osaka, Japan, from December 2 to 4, 2026. At Hall 6A, Booth A-48, we will run a live visual inspection demo: a robot scans a car body, deliberately made dents and scratches emerge in 3D, and our AI flags them as NG.

Event Details

Event RoboNext 2026
Dates December 2–4, 2026, 10:00–17:00 (closes at 16:00 on December 4)
Venue INTEX Osaka, Japan
Booth Hall 6A, Booth A-48 (Service Robot & Mechatronics Zone)
Admission Free with advance online registration (otherwise ¥1,000)
Official site https://robonext.nikkan.co.jp/ (visitor registration)

Highlight 1: A Robot That Patrols the Car Body

We mounted the TR-55 observation unit on the tip of a Dobot MG400 desktop robot arm. The arm moves automatically over several points on a 1/16-scale die-cast model car, capturing images at each stop.

The TR-55 observation unit on the tip of a robot arm, imaging the roof of a blue model car

Think of it as handing the "tilt it under the light and look again" routine to a robot. The demo runs continuously, so you can catch the whole sequence simply by stopping by the booth.

Highlight 2: Hard-to-See Defects, Revealed in 3D

Small dents and scratches on painted or glossy surfaces are easy to miss. To a conventional camera or the human eye, they tend to blend into reflections and shading.

The images are captured with FORESIGHT STEREO®, our 3D imaging technology built on photometric stereo. It takes several shots with light coming from different directions and uses the changes in brightness to capture surface orientation (surface normals). Instead of showing up as faint shading, the dents and scratches appear as actual shapes. Whether a given defect can be detected depends on the surface condition and the shape of the defect.

Top-down view of the robot arm and imaging head, with the model car below and a monitor in the background

Highlight 3: E3 ENGINE Calls It NG

Once a defect has been revealed, E3 ENGINE®, our decision engine, judges it as NG. E3 ENGINE is an AI anomaly detection engine that learns the features of good-product images, then scores and visualizes abnormal areas. Every result falls into one of three classes: OK, Human_Check, or NG.

Capture by robot, visualization by FORESIGHT STEREO, judgment by E3 ENGINE — seeing the three steps run as one flow says more than any photo. Come watch the defects appear in person.

Who Should Visit

  • Quality and inspection engineers working with painted surfaces or exterior parts
  • Teams exploring robot-based automation of visual inspection
  • Anyone who wants to discuss whether this approach could work on their own parts

See You at Booth A-48

RoboNext 2026 runs December 2–4, 2026, at INTEX Osaka, Hall 6A, Booth A-48 (closing at 16:00 on the final day). If you are visiting the show, we would be glad to see you at our booth.


Admission is free if you register in advance — please register on the RoboNext 2026 official site before your visit (otherwise ¥1,000). To discuss anything before the show, contact us at info@tomomi-research.com.

TOMOMI RESEARCH, INC. — https://www.tomomi-research.com/


Dobot and MG400 are trademarks or registered trademarks of Shenzhen Yuejiang Technology Co., Ltd.

Leave a Reply

Your email address will not be published. Required fields are marked *

CAPTCHA


This site uses Akismet to reduce spam. Learn how your comment data is processed.